GS 168v Injection Molding Machine

High speed system response and short molding cycle Largely decrease system oil pressure save electric power consumption

			GS168V
			A	B	C
INJECTIONUNIT	Screw Diameter	mm	40	45	50
	Screw L/D Ratio	L/D	22.5	20	18
	Shot size(Theoretical)	cm3	253	320	395
	PS) Injection Weight	g	230	291	359
	PS Injection Rate	g/s	100	126	156
	PS Plasticizing capacity	g/s	13.9	18	21.6
	Injection Pressure	Mpa	240	190	154
	Screw Speed	Rpm	0-195
CLAMPINGUNIT	Clamp Tonnage	KN	1600
	Toggle stroke	mm	430
	Space Between Tie Bars	mm	470*470
	Max.Mold Height	mm	520
	Min.Mold height	mm	180
	Ejector stroke	mm	140
	Ejector tonnage	KN	33
	Ejector Number	piece	5
OTHERS	Max.Pump Pressure	Mpa	17.5
	pump motor power	KW	15
	Heater Power	KW	9.75
	Machine Dimension(L*W*H)	m	4.9*1.29*1.96
	Machine Weight	t	5.3
	PS Hopper Capacity	Kg	25
	Oil Tank Capacity	L	350

Main features of GSV series:

 

1) Energy-saving. Compared with normal constant pump drive machine, the variable pump drive GSV series machine is able to save electric power consumption by 30 up to 50%, especially for the thick wall products.

2) High speed system response and short molding cycle

3) Largely decrease system oil pressure

4) Reduce mold open and close crash to extend service time of machine and mold

5) To extend service life of oil piping system, to reduce maintenance possibilities and save maintenance cost.

6) Higher requirement for hydraulic oil; provides with imported high quality oil strainer/filter

GS 168v Injection Molding Machine